Safety Information - EdilKamin MAXIMA 14 Instalación Uso Y Mantenimiento

THE BOILER MUST NEVER BE MADE TO OPERATE
WITHOUT WATER IN THE SYSTEM.
IT CAN BE DAMAGED IF IT IS IGNITED WITH NO WA-
TER IN THE SYSTEM.
MUST BE MADE WITH A PRESSURE OF ABOUT 1.5 BAR.
• The appliance is not designed to be used by people, including
children, with reduced physical, sensorial or mental abilities.
Children must be supervised to ensure they do not play with
the appliance.
• The main risks that may derive from using the boiler pertain
to non-compliance with installation instructions, direct contact
with live electrical parts (internal), contact with the fi re or hot
parts, when extraneous substances or non-recommended fuel
are introduced, or due to incorrect maintenance or by repea-
tedly pressing the ignition button without having emptied the
burner.
• Should components fail, the boiler is equipped with safety
devices to guarantee its automatic shutdown.
These are activated without any intervention required.
• In order to function correctly, the boiler must be installed in
accordance with the instructions given herein and the door
must not be opened during operation: combustion is fully
automatic and requires no intervention.
• Only use certifi ed, high quality, 6/8 mm diameter wooden
pellets for fuel.
• Under no circumstances should any foreign substances be put
into the hearth or the hopper.
NEVER use liquid fuel to ignite the boiler or rekindle the
embers.
• Do not use fl ammable products to clean the smoke channel
(the fl ue section connecting the boiler smoke outlet to the
chimney fl ue).
• Do not clean when hot.
• Hearth and hopper components must only be cleaned with a
vacuum cleaner.

SAFETY INFORMATION

- 45
• The boiler must not function if the door is open, if the pellet-
loading port is open.
• It must not be used as a step ladder or a base on which to rest
any object.
• Do not place anything, which is not heat resistant near the
boiler.
• Do not lay laundry directly on the boiler to dry.
Any clothes horse or similar must be placed at a safe distance
from the boiler-stove (danger of fi re).
• Make sure the boiler is installed and ignited the fi rst time
by Edilkamin-qualifi ed CAT personnel (technical assistan-
ce centre) in accordance with the instructions provided here
within; this is an essential requirement for the validation of the
guarantee.
• Whilst the boiler is in operation, the exhaust pipes and door
become very hot (do not touch without using the right gloves).
• Do not obstruct the ventilation apertures in the room where the
boiler-stove is installed, nor the air inlets of the boiler itself.
• Do not wet the boiler and do not go near electrical parts with
wet hands.
• Do not use reducers on the smoke exhaust pipes.
• The boiler must be installed in a room that is suitable for fi re
prevention and equipped with all that is required (power and
air supply and outlets) for the boiler to function correctly and
safely.
• The boiler must be kept in a room where the temperature is
above 0 °C.
• Use appropriate anti-freeze additives for the water of the
system.
• In the event that the water used for fi lling and toping up
has a hardness greater than 35° F, use a water softener. For
suggestions please refer to regulation UNI 8065-1989 (Water
Treatment In Heating Systems For Civil Use).
-