EdilKamin MAXIMA 14 Instalación Uso Y Mantenimiento página 73

MENU
Touching the MENU icon opens the menu selection page.
From this page, you can access the various menus by touching
the corresponding buttons on the display:
Opens the date/
time setting menu
Opens the setup
Sets the date/time
page of the weekly
programmer
Time program
Opens the
Input/Output debug
diagnostics page.
For the exclusive
use of qualifi ed
personnel
Confi gures parameter
Opens the param-
eter settings menu.
For the exclusive
use of qualifi ed
personnel
Note: To display the help for maintaining and using the boiler,
you must purchase a microSD card to insert in the back of the
control interface; ask the service centre for information.
Sets the date/time
On this screen, you can set the date/time.
To edit a fi eld, you must fi rst select it by touching the value
you want to change and then using the plus/minus buttons.
Press the Save button to confi rm the new settings.
Select to set
the date
Select to set
the time
Select to set the
24-hour clock
display format
INSTRUCTIONS FOR USE
Opens the use and
maintenance guide
(optional)
Opens the
PDF manuals language setting
page
Change Language
Opens the con-
sumption control
page
Displays consumption data
Go Back
Exits the page
Plus/minus
buttons
Saves the new
settings
Exits the page
Time program
In this screen, you can set the weekly program of the boiler.
For each day of the week, you can set up to 6 time slots and, in
each, the target output temperature for the boiler.
To set a time slot, select the tab for the day to confi gure, then
the set fi eld of the desired time slot (the fi eld will be highlight-
ed), adjust the time by touching the plus/minus buttons. Do the
same with the temperature fi eld.
To turn off the boiler, set the temperature box to "OFF". Press
the "-" to lower the temperature setting to the minimum, and at
the end of the range you will fi nd the OFF option.
To apply the time slot, you must enable it.
For the changes to take effect, press the Save button.
You can copy the entire schedule of one day of the week to one
or more tabs of the other days with this procedure:
1. Select the tab of the day you want to copy
2. Set the time slots
3. Press the Copy button (the button will change to End
Copy)
4. Select the tab of the day you want to copy to
5. Press the Paste key
6. Repeat from step 4 for each tab to be copied
7. Select the tab from which the settings were copied
8. Press the End Copy button to end the operation
Select the day of the week Set the temperature
to confi gure of the time slot
Set the time slot
Note:
To program the time slots, you must enable the Time Slot
Program option in the Date/Time Settings tab in the LOCAL
SETTINGS menu.
- 69
-
Select the boxes to en-
Plus/minus buttons
able the time slots
Copy/Paste the
selected tab
Saves the new
settings
Exits the page