Fig. 33
(2) [PF 3911] 5/4'' x 5/4'' x 12''
(3)
1-1/4''
screws
per board
from inside
Fig. 33a
[PF 3867] 1'' x 5'' x 21-1/2''
[PF 3865] 1'' x 5'' x 18-1/2''
1-1/4'' screw
DETAIl VIEW
INSIDE VIEW
[PF 3868] 1'' x 5'' x 21-1/2''
[PF 3866] 1'' x 5'' x 18-1/2''
Large Roof
(4)
1-1/4''
1. ttach (2) Slat Supports as shown in (Fig. 33).
screws
Note: Drive screws through bottom of underlying
per board
slats and into underside of Slat Supports.
2. ttach (4) Roof Slats as shown in (Fig. 33a).
3. Install (2) Safety Brackets as shown in (Fig. 33b).
Note:
bottom of Roof A-Frame
43
Fig. 33b
Note:
Fit Notch in Safety
Brackets Tightly
Against Bottom of
Roof A-Frame
(2)
Safety
Brackets
(6)
1-1/4''
screws
per bracket
ssemby Cont.
Fit notch in Safety Brackets tightly against
ssembly Plan