Playcore Swing-N-Slide PB 8316 Windward Instrucciones De Montaje página 49

PB 8316 Windward Turbo Tower Installation
PB 8208 Tremont Skip Ahead to Page 58
Fig. 1
(3)
2-1/2''
screws
per joint
2-1/2'' Screw
Unit Modification
1. Install Support Board as shown in (Fig. 1).
2. Install Barrier Boards as shown in (Fig. 2). Make certain to drive the 1-1/2'' screws through the 1'' x 4'' Barrier
Boards and into the 2'' x 4'' Barrier Support Boards.
Pages 49-57
Fig. 2
36''
NOTE: There must be a 2-3/8''
49
(3)
2-1/2''
screws
per joint
(2)
1-1/2'' screws
per joint
Nominal Gap between all
barrier boards.
1-1/2'' Screw
ssembly Plan