List of Materials
Parts supplied
Removing the packaging
CAUTION!
Remove carton carefully, Wear gloves to protect against
sharp edges.
WARNING!
Remove the protective film covering the product before
putting into operation.
•
Hood canopy assembly with blower.
•
Lamp already installed.
•
Transition (3 - 1/4" x 10" rectangular)
•
Grease filter.
•
Hardware bag with:
•
Use, care and installation guide
•
4x8 screws x 3 (to assemble Transition)
•
4,5x13 screws x 6
•
10x50 screws x 4
•
1 Torx Adapter
Dimensions and Clearances
2
(6.5 cm)
"
(1.0 cm)
7½"
(19.0 cm)
2"
(5.1 cm)
30" (76.2 cm)
36" (91.4 cm)
Parts not supplied
Optional Accessories
•
Duct Cover
•
Backsplash kit
Tools/Materials required
•
Wire nuts
•
Tape to mount template
•
Metal duct length to suit installation
•
Measuring tape
•
Pliers
•
Gloves
•
Knife
•
Safety glasses
•
Electric drill with 5/16" and 3/8" Bits
•
Strain relief
•
Spirit level
•
Duct tape
•
Screwdrivers:
Phillips (Posidrive) # 2
Torx # 2
•
Wire cutter/stripper
•
Masking tape
•
Hammer
•
Saw, jig saw or reciprocating saw
"
29 " (74.0 cm)
35 " (89.2 cm)
5
12"
(30.5 cm)
10"
(25.4 cm)
23" (58.4 cm)