Electrical Connection Diagram - Astralpool 35275 Manual De Instalación Y Mantenimiento

Automatic colour sequence : Selection from among eight programmes of colour sequences. Each programme is defined by
the duration of each colour and of the transition from one colour to another, according to the following table:
SEQUENCE
1 Red Green
2 Cyan Purple
Emerald
3
Green
green
4 Red Orange
5
Red Magenta
6 Red Orange
Pale
7
Purple
Violet
8 Red Green

6.2.3. Electrical connection diagram

In both TOP and ECO configurations, two cables should be connected in the two 12VCA terminals of the power supply in
parallel with any spotlight (12 V Mains), as if it were another Colorplus spotlight.
The power supply will therefore interpret the signal received and will perform the same functions as the Colorplus
spotlights.
To control the projectors with a modulator and/or remote control, connect the synchronism cable from the output of a 12V
transformer to the power supply. The 12V of the transformer itself can feed large projectors (if there are any), or the 12V of
a 50W transformer or more, in cases of installations with Micro projectors only.
** Attention: The pushbutton of the power supply has operation priority and should be disconnected if used jointly with the
Colorplus series of spotlights. If it is not disconnected, the spotlights will not work correctly.
Colorplus TOP diagram
Power supply
Mini LED
projectors
Blue
Yellow
Cyan Sky-blue Blue
Green Orange
Blue Magenta
Green Cyan Blue
Cyan Yellow White
Blue Yellow Cyan
Emerald
Sky-blue Cyan
green
Magenta
Yellow Cyan Purple
Pale
Purple Sky-blue
Violet
6
Emerald
Orange Magenta
green
White