Cleaning Methods; Shutting Down - Kärcher Puzzi 8/1 C Manual Del Usuario

Ocultar thumbs Ver también para Puzzi 8/1 C:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Figure 8, see cover page
Remove the dirt water reservoir
from the appliance and empty it.

Cleaning methods

Normal soiling
Spray and suction off detergent so-
lution in one work cycle.
Note
A repeated suctioning without spraying
will shorten the drying time.
Strong soiling or stains
Apply detergent solution with suc-
tion turbine turned off and soak for
10 to 15 minutes.
Clean the surface just like with nor-
mal soiling.
In order to further improve the
cleaning result, the surface can be
recleaned using clear, warm water.
Cleaning tips
Highly soiled spots should be pre-
soaked and the detergent solution
should soak 5 to 10 minutes.
Always work from the light to the
shade (from the window to the
door).
Always work from the cleaned to
the uncleaned surface.
The more sensitive the surface (ori-
ental rugs, berbers, upholstery ma-
terial) the lower the cleaning
solution concentration should be.
Rugs with jute backing can shrink if
too much water is used and can
bleed colours.
Brush high-fiber rugs in the direc-
tion of the weave after cleaning (us-
ing a fiber brush or a scrubber).
Water-proofing the fabric using
Care Tex RM 762 after the wet
8
English
cleaning prevents a quick resoiling
of the textile surface.
Do not step on cleaned surfaces
until they have dried and do not
place furniture on them to avoid
pressure spots or rust stains.
When cleaning previously sham-
pooed carpets, foam will be generat-
ed in the dirt water reservoir. In such
a case add Foam ex RM 761 to the
dirt water reservoir.
Detergent
Carpet and uphol-
stery cleaning
Defoaming
Waterproofing car-
pets
Mite removal
If you require further information
please request the product information
sheet and the DIN safety data sheet for
the respective cleaning agent.

Shutting down

Empty the fresh water reservoir
Switch off the spray and suction
switches.
Shortly activate the lever on bender
to decrease the pressure.
Separate bender from the spray/
suction hose.
Figure 7, see cover page
Insert the suction hose into the
fresh water reservoir.
Press the suction switch to turn on
the suction turbine.
RM 760 pow-
der
RM 760 tabs
RM 764 liquid
RM 761
RM 762
RM 765 Mitex

Publicidad

Tabla de contenido
loading

Tabla de contenido