smartheart 01-523 Serie Manual De La Instrucción página 25

MEMORY FUNCTIONS
3. All results for a given
measurement will display,
including measurement results,
pulse rate, Hypertension
Indicator and Irregular Heartbeat
alert (if applicable), Fig 2.
4. When the number of readings
exceeds 60 , the oldest data will
be replaced with the new record.
5. Press POWER to turn the monitor off at any time
during review of the stored
measurements.
Clearing Measurements
From Memory
To delete a all results in a given
bank:
1. When the monitor is off, press
and release the MEM button to
access the memory bank feature.
2. Press and hold both the MEM
and SET buttons for 3 seconds.
3. The display will show 'dEL' and
'dONE', Fig 3.
4. The memory bank is now empty,
Fig 4, and the monitor will turn
off.
ENGLISH • 25
Fig. 2
Fig. 3
Fig. 4