Publicidad
Idiomas disponibles
Idiomas disponibles
OBJ_BUCH-0000000130-003.book Page 21 Thursday, December 15, 2016 1:40 PM
en
21
Starting and stopping the drill motor
Fig.15
(figure 15).
To start the drill motor with clockwise rota-
tion, press the button with the „
" symbol.
100
%
l
The drill motor starts with the highest speed.
85
%
l
75
%
l
60
%
l
50
%
The last set speed is automatically stored
l
(Memory Function). To start the power tool
with the last set speed, press and hold the
button with the
symbol, and then press
the button with the
symbol.
100
%
l
85
%
l
75
%
To lower the speed, press the „
" symbol.
l
60
%
l
50
%
l
To increase the speed, press the „
" sym-
bol.
To stop the drill motor, press the „
"
symbol.
Do not stop the drill motor during the drilling
Memory Function
procedure.
To start the drill motor with counterclock-
wise rotation, press the button with the
„
" symbol. The drill motor will run as
long as the button is pressed.
When the power supply is disconnected
while the drill motor is running, a protective
circuit prevents automatic restarting of the
drill motor. Restart the drill motor again.
In case of overload, the drill motor automati-
cally stops and must be restarted again.
Publicidad
