Abicor Binzel ABIPLAS WELD 100 POWDER W Instructivo De Servicio página 26

EN
English Translation of the original operating instructions
© The manufacturer reserves the right, at any time and without prior notice, to make such changes
and amendments to these operation Instructions which may become necessary due to misprints,
inaccuracies or improvements to the product. Such changes will however be incorporated into
subsequent editions of the Instructions. All trademarks mentioned in the operating instructions are
the property of their respective owners.
All brand names and trademarks that appear in this manual are the property of their respective
owners/manufacturers.
Our latest product documents as well as all contact details for the ABICOR BINZEL national
subsidiaries and partners worldwide can be found on our website at www.binzel-abicor.com
1 Identification
1.1 CE marking
2 Safety
2.1 Designated use
2.2 Obligations of the operator
2.3 Personal protective equipment
(PPE)
2.4 Warnings
2.5 Product-specific hazards
2.6 Emergency information
3 Product description
3.1 Technical data
3.2 Abbreviations
3.3 Nameplate
3.4 Signs and symbols used
4 Scope of delivery
4.1 Transport
4.2 Storage
5 Functional description
6 Putting into operation
6.1 Setting up the torch body
6.2 Attaching the machine-side
connector
6.3 Connecting the coolant
6.4 Setting the gas flow rate
EN - 2
ABIPLAS
EN-3 7
EN-4 7.1
EN-4 8
EN-5
EN-5 9
9.1
EN-6 9.2
EN-6
EN-6 10
EN-7
11
EN-7
EN-7 12
EN-10 12.1
EN-10 12.2
EN-10 12.3
EN-11
EN-11
EN-11
EN-12
EN-13
EN-13
EN-15
EN-15
EN-16
®
WELD 100/150 POWDER W
Operation
Welding process
Putting out of operation
Maintenance and cleaning EN-18
Torch neck
Cable assembly
Troubleshooting
Disassembly
Disposal
Materials
Consumables
Packaging
EN-17
EN-18
EN-18
EN-19
EN-20
EN-20
EN-22
EN-23
EN-23
EN-23
EN-23