Brita WHS - 201 Instrucciones De Instalación página 5

materials and tools needed
fittings to
purchase
3/4"
QUANTITY COPPER
PIPE
3/4" O.D. Tube x 3/4" M.I.P.
Compression Male Adapter
2 or 3/4" MPT x 3/4" CTS QC
Adapter (WATTS Water
PEX)
TOOLS
Pipe cutter or hacksaw
2 Adjustable wrenches
Tape Measure
SUPPLIES
Plumber's Tape
Note: For galvanized piping, consult a professional plumber.
• Measure the diameter of the existing pipe.
• Review the System Configuration Chart.
• Determine how you will configure your filter system.
• Dry assemble the complete including all fittings and valves.
fittings to
purchase
WHS-201 installation instructions
MATERIALS NEEDED FOR 3/4" DIAMETER HOUSING
INLET/OUTLET PORTS
1"
COPPER
PIPE
No individual fitting. It may
be made up of: 1" x 1" sch 40
coupling; 1" x 3/4" sch 40
bushing; 3/4" sch 80 nipple
(2 each); 1" CTS QC Adapter
(WATTS Water PEX) sch
Pipe cutter or hacksaw
2 Adjustable wrenches
Tape Measure
Plumber's Tape
A grounding kit (not included) MUST be installed on
water pipes if the pipes are used to ground electrical
systems, appliances, or phones. Typically these are
homes with metal water pipes.
whole house filtration system
Configure Your
Step 1
System
3/4"
PVC
PIPE
3/4" NPT x 3/4" tube
Male Adapter
PVC Slip Type
Pipe cutter or hacksaw
2 Adjustable wrenches
Tape Measure
Plumber's Tape
PVC Cleaner
PVC Adhesive
Step 1 continued on next page >>
1"
PVC
PIPE
3/4" NPT x 1" tube
Male Adapter
PVC Slip Type
Pipe cutter or hacksaw
2 Adjustable wrenches
Tape Measure
Plumber's Tape
PVC Cleaner
PVC Adhesive
5
Version 2.0D