Brita WHS - 201 Instrucciones De Instalación página 7

Note: Measure twice, cut once!
Note: Use a pan or bucket to catch any remaining
water in the pipes.
• Turn off main water supply line.
• Turn on all faucets and drain lines
completely.
• Measure overall length of configured
system.
• Reduce this measurement enough to
allow for the amount of engagement
to determine how much pipe to
remove from the line.
• Mark section of plumbing pipe that
will need to be removed.
• Cut marked section from plumbing
pipe.
• Remove any burrs or debris from cut
pipe edges with a file.
WHS-201 installation instructions
whole house filtration system
Mark and Cut
Step 2
Plumbing Pipe
materials and tools needed
safety
pipe cutter or
safety glasses tape measure
glasses
hacksaw
CAUTION
fittings to
file
purchase
7
Version 2.0D