Brita WHS - 201 Instrucciones De Instalación página 8

whole house filtration system
Install Mounting Bracket,
System Head, and Filter
Housing
• Dry assemble the complete system
(according to the configuration
chosen), including all fittings and
valves.
• Measure the overall length (see
diagram) of the configured system.
• Reduce this measurement enough to
allow for the amount of engagement
to determine how much pipe to
remove from the line.
• When installing mounting bracket,
position it on top of the system head,
aligning the bracket holes with the
holes in the system head. Insert the
four 3/4" mounting screws through
the mounting bracket and into the
holes of the system head until tight.
8
Step 3
materials and tools needed
tape measure
CAUTION
X
Step 3 continued on next page >>