Display Functions - Kettler SM 9150-75 Instrucciones Informáticas Y De Formación

User presetting (U1 / U2 / U3 / U4 / U0)
Using the USER button, the desired or preset user
can be selected.
If the machine has to be disconnected from the
mains and reconnected for e.g. due to a change in
location, the input personal user data will be retai-
ned when the machine is restarted (U1 to U4).
U 0 can be selected for a guest user.
IMPORTANT! No training data is saved using this
USER setting (TIME, DISTANCE and CALORIES)! This
data is only counted during a training session.
RECOVERY
The RECOVERY button can be used to activate the
recovery heart rate measurement after your training
session.
Heart rate measurement
The heart rate measurement can be taken in 3
ways:
1. Hand pulse sensor (standard)
2. Ear clip (optional)
The plug is connected to a socket in the machine.
3. Chest strap without receiver (optional)
The receiver is built into this electronic unit behind
the display. If an ear clip is plugged in, this must
be removed. The POLAR T34 chest strap without
a plug-in receiver is available as an accessory
(Item no. 67002000).

Display functions

General
The display is divided into four separate display
areas
1. The top row displays information on the status or
selected training program
2. The top left zone gives information on the current
user (U 0-4) and user-specific data is recorded:
gender, age and weight.
Using this input data, the computer calculates
data relating to heart rate and the level of intensi-
ty during training.
3. The large screen which displays a graphic image
of the training distance (course profile) offers sim-
ple user guidance during the training session.
One bar = low intensity; 16 bars above one ano-
ther = maximum intensity.
4. Below the user display and in the entire bottom
row of the screen, there are several adjacent sym-
bols where the different target values and training
units are displayed. When presetting these units,
the functional symbol will blink > e.g. TIME.
SM 9150-75
G
25
GB