Optika Italy IM-3 Serie Manual De Instrucciones página 14

6. Screw the terminal with the etched G on top of
the filter lever. Repeat the same steps for the
right side, mounting the B filterset. (Fig. 16)
7. In order to prevent possible damages from UV
radiation, mount the orange protection screen as
shown. (Fig. 17)
8. Open the lamp housing using the door lock screw
① and remove the lamp holder. (Fig. 18)
9. Remove the plastic block ② from the lamp holder
(or the exhausted lamp in case of replacement)
by loosening the two locking screws ③. (Fig. 19)
Page 14
Fig. 16
Fig. 17
①
Fig. 18
③
②
③
Fig. 19