Delphi YDT262 Manual De Funcionamiento Y Servicio página 10

YDT262 Operating and Servicing Manual
OVERCHECK ANGLE
ROTATE TO ZERO
DEG
SEND TEXT
READY
USER NOT AVAILABLE
ZERO ANGLE
RECORDED
ZERO ANGLE
ERROR
;;
The procedure below refers to HyperTerminal. Other programs will be similar – the important
information is the COM port setup given in steps 4 and 5; refer to the operating instructions for your
particular program to set these.
1. Connect the cable between the YDT262 and one of the PC COM ports. Do not switch on the
YDT262 yet.
2. The first time you use HyperTerminal you will need to configure the communication settings. To
do this, open HyperTerminal (Start > Programs > Accessories > HyperTerminal > HyperTerminal).
It will assume you are making a new connection. Enter a name for the connection, e.g. YDT262,
choose an icon, then press OK.
3. In the next box select the COM port you are using and press OK.
4. In the next box, configure the port as follows, and then press OK. Baud: 9600; Data Bits: 8;
Parity: None; Stop Bits: 1; Flow Control: None.
5. Under ASCII setup (File, Properties, Settings, ASCII Setup), ensure that the "Send line ends with
line feeds" option is selected, then click OK twice to return to the main screen.
6. Choose File, Save. This saves the connection information as a HyperTerminal file, and puts a
link to it on the Start menu. Next time, you can just click on this link (Start > Programs >
Accessories > HyperTerminal > YDT262.ht) and it will open HyperTerminal with the correct
settings.
7. Switch on the YDT262 while holding down the Up and Down buttons. The message "SEND
TEXT" will appear on the display. You are now ready to transfer the language file.
8. In HyperTerminal select Transfer, Send Text File, and then browse to find your language text file
and select Open.
9. When the download is complete, the box will display "READY". Press Enter to return to normal
operating mode.
10
THIS IS AN UNCONTROLLED DOCUMENT downloaded by Lukas Matuska on 16 Feb 2016
Any technical intervention requires certified Hartridge training. Contact Hartridge Ltd for details.
DELPHI DIESEL AFTERMARKET
HL018, Issue 2