DELPHI DIESEL AFTERMARKET
ENGLISH
Foreword
Copyright
DT Assembly & Test - Europe Ltd. reserves the copyright of all information and illustrations in this
publication which is supplied in confidence and which may not be used for any other purpose other
than that for which it was originally supplied. The publication may not be reproduced in part or in
whole without the consent in writing of this company.
© DT Assembly & Test - Europe Ltd.
Safety Information
The YDT262 is used in conjunction with a host test bench. Basic safety rules and precautions for
operating the host test bench should be observed.
Warnings, Cautions and Notes
The precautionary notes in this publication, indicated by the words WARNING, CAUTION, or NOTE
provide information about potential hazards to personnel or equipment. Ignoring these notes may
lead to serious injury to personnel and/or damage to equipment. These notes appear as follows:
WARNING! INDICATES THAT A SITUATION MAY BE HAZARDOUS TO PERSONNEL.
INSTRUCTIONS ARE PROVIDED FOR AVOIDING PERSONAL INJURY.
CAUTION! Indicates that conditions exist that could result in damage to equipment.
Instructions are provided to prevent equipment damage.
NOTE
Indicates additional information for clarification where there may be confusion.
General Warnings
HL018, Issue 2
THIS IS AN UNCONTROLLED DOCUMENT downloaded by Lukas Matuska on 16 Feb 2016
Any technical intervention requires certified Hartridge training. Contact Hartridge Ltd for details.
Ensure good levels of lighting for safe, efficient equipment operation.
Accidents can occur to unauthorised personnel during testing. Untrained
person(s) must not be present in the test area when the equipment is operating.
Only qualified personnel are to operate this equipment.
This equipment contains electrostatic sensitive devices. Observe the necessary
precautions for handling electrostatic discharge sensitive devices. Do not touch
printed circuit boards and associated electronic connections and components.
YDT262 Operating and Servicing Manual
5