Abicor Binzel AUT-WIG 20G Instructivo De Servicio página 20

EN English Translation of the original operating instructions
© The manufacturer reserves the right, at any time and without prior notice, to make such changes
and amendments to these operation Instructions which may become necessary due to misprints,
inaccuracies or improvements to the product. Such changes will however be incorporated into
subsequent editions of the Instructions. All trademarks mentioned in the operating instructions are
the property of their respective owners.
All brand names and trademarks that appear in this manual are the property of their respective
owners/manufacturers.
Our latest product documents as well as all contact details for the ABICOR BINZEL national
subsidiaries and partners worldwide can be found on our website at www.binzel-abicor.com
1 Identification
1.1 EU Declaration of Conformity
1.2 Responsibilities of the User
2 Product Description
2.1 Designated Use
2.2 Use contrary to the designated use EN-4
2.3 Technical Data
2.4 Abbreviations
2.5 Nameplate
3 Safety Instructions
3.1 Classification
3.2 Emergency information
4 Components
4.1 Transport
4.2 Storage
5 Functional Description
6 Putting into operation
6.1 Equipping the TIG welding torches EN-8
6.1.1 AUT-WIG 20G/400W
6.1.2 AUT-WIG 200W
6.2 Tungsten electrode
6.3 Connecting the TIG welding torch EN-9
6.4 Setting the shielding gas quantity EN-9
6.5 Connecting the coolant
EN - 2
EN-3 7
EN-3 7.1
EN-3
8
EN-3
EN-3 9
9.1
EN-4
10
EN-5
EN-5
11
EN-5
EN-5 12
EN-6 12.1
12.2
EN-6 12.3
EN-7 12.4
EN-7
13
EN-7 13.1
EN-7
EN-8
EN-9
EN-9
EN-10
Operation
Welding process
Putting out of operation
Maintenance and cleaning EN-13
Basic cleaning
Troubleshooting
Dismounting
Disposal
Materials
Materials
Consumables
Packaging
Appendix
Dimensional diagrams Torch
AUT-WIG
EN-11
EN-12
EN-12
EN-14
EN-14
EN-15
EN-15
EN-16
EN-16
EN-16
EN-16
EN-17
EN-17