Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
AUT-WIG
1 Identification
1.1 ECE marking
1.2 Responsibilities of the User
2 Product Description
2.1 Designated Use
2.2 Use contrary to the designated use
TIG welding torches are used in industry and in the trade for inert gas welding
using tungsten electrodes and inert gases. This series can be used in all welding
positions. TIG welding torches are available in liquid-cooled and air-cooled
models. The liquid-cooled model requires a re-circulating cooling unit. These
operating instructions only describe the TIG welding torches
AUT-WIG. TIG welding torches may only be operated using original
ABICOR BINZEL spare parts.
This device fulfils the requirements of the relevant EU directives.
Conformity is confirmed by the CE marking on the device.
Within the EEA (European Economic Area) the current version of the national
implementation of the Framework Directive (89/391/EEC) and the related
individual directives and, of these, especially Directive (89/655/EEC)
concerning the minimum safety and health requirements for the use of work
equipment by workers at work must be adhered to. In Germany, the Job
Protection Law and the Company Safety Ordinance must be heeded. In
addition, the operator must ensure that the TIG welding torches in connection
with welding units comply with the EC EMC Directive (2014/30/EU) and that
the signal utilization of the integrated welding current monitoring against stray
currents is installed properly.
TIG welding torches must be used for safe welding and low- and high-alloy
materials. They are designed for robot and automatic use. Any use beyond that
is prohibited. Designated use also includes the observance of the prescribed
operating, maintenance and servicing conditions.
Any use other than that described under "Designated Use" is considered
contrary to the designated use. Unauthorized conversions or power increase
modifications are not allowed.
1 Identification
EN - 3
Publicidad
Tabla de contenido
