Technical Data - Abicor Binzel AUT-WIG 20G Instructivo De Servicio

2 Product Description

2.3 Technical Data

Ambient temperature Welding
Transport and storage
Relative humidity
Tab. 1 Physical conditions
Type of voltage
DC polarity of the electrodes
Type of use
Voltage rating
Max. arc ignition and stabilization voltage
Protection type of the machine-side
connections
Shielding gas
Electrode
Electrode length
Required cooling unit capacity
Tab. 2 General torch data (EN 60 974-7)
Type Type of Load
cooling
DC
AUT- A
WIG
20G air 200
200W liquid 220
400W liquid 400
Tab. 3 Product-specific torch data (EN 60 974-7)
EN - 4
ED Elec-
trode 
AC*
A % mm
140 60 0.5 - 3.2 7 - 20
160 100 0.5 - 3.2 7 - 20
280 100 0.5 - 4.0 7 - 20
*According to EN 60 974-7 the value for alternating current (AC) must be
given at 70% of the tested direct current value (DC). All data refer to 4 m hose
assemblies. For any further information regarding the available hose assembly
designs and performance data, please refer to the order documentation.
- 10 °C to + 40 °C
- 25 °C to + 55°C
up to 90 % at 20 °C
DC or AC
Usually negative
automatic
141 V peak value
6 kV
IP2X (EN 60 529)
as per DIN EN ISO 14175
industry standard tungsten electrodes suitable for
TIG use, preferably low radiation
175 mm
800 W
Gas Cooling
flow
Max. supply
temp.
l/min °C
50
50
AUT-WIG
Torch inlet
pressure
Min. min. max.
flow
l/min bar bar
0.7 2.5 3.5
0.7 2.5 3.5