Kohler K-18647 Guía De Instalación Y Cuidado página 13

Cement
Board
8. Install the Finished Wall
CAUTION: Risk of product damage. Do not puncture the water
tank with the fasteners.
NOTE: A template to assist in cutting out the finished wall is
included on the lid of the box.
IMPORTANT! It is recommended to use cement board or tile
backer board for the wallboard backing. Gypsum board may
compromise the load strength of the bowl.
NOTE: The wall thickness should not exceed 2-3/4" (70 mm).
Install the finished wall. Make sure the cords are accessible
through the cutout on the side of the drain pipe.
Install the bowl according to the instructions packed with the
product.
Kohler Co.
Front View
16"
(406 mm)
Min
36"
(914 mm)
Min
13
Cords
1247365-2-B