Tools And Materials; Before You Begin - Kohler K-18647 Guía De Instalación Y Cuidado

Tools and Materials

Before You Begin

IMPORTANT! 2x4 framing or larger is required for this installation.
IMPORTANT! In areas with freezing temperatures, install on an
interior wall. If installed on an exterior wall, provide adequate
insulation to prevent the possibility of freezing.
NOTE: If 2x6 framing is used, the drain outlet may be angled 45
degrees in either direction.
NOTE: This product is not intended to be used as a retrofit device
for 1.28 gpf (4.8 lpf) water closets.
Only bowl model K-76395 is compatible with this carrier.
During installation, make sure the inlet tube connections and
gaskets remain fully engaged to ensure a watertight seal.
Observe all local plumbing and building codes.
1247365-2-B
Qty: 8
3/8" x 2-1/2" (64 mm) Min
Lag Bolts with Washers
Plus:
• Conventional woodworking
tools and materials
• 3/8" x 2" (51 mm) Min
Concrete Expansion Bolts
(for concrete subflooring)
Optional:
• Assorted electrical tools
2 Kohler Co.