DAB FEKABOX 110 Instrucciones Para La Instalación Y El Mantenimiento página 24

CONTENTS
1. WARNINGS
RESPONSIBILITY
2.
3. DIMENSIONS AND WEIGHTS
4. INSTRUCTIONS FOR USE
INSTALLATION
5.
6. ALARM SYSTEM
7. MAINTENANCE
TROUBLESHOOTING
8.
1. WARNINGS
1.1 Before installation, carefully read this documentation and that supplied with the pump
manual and the control panel. It is indispensable to have the electric and hydraulic connections
made by skilled personnel, in possession of the technical qualifications indicated by the safety
standards concerning the design, installation and maintenance of technical plants, in force in the
country where the product is to be installed.
Failure to comply with the safety regulations not only causes risk to personal safety and damage
to the equipment, but invalidates every right to assistance under guarantee.
The term skilled personnel means persons whose training, experience and instruction, as well as
1.2
their knowledge of the respective standards and requirements for accident prevention and
working conditions, have been approved by the person in charge of plant safety, authorizing them
to perform all the necessary activities, during which they are able to recognize and avoid all
dangers. (Definition for technical personnel IEC 364).
The appliance is not intendend for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a person responsable for their
safety. Children should be supervised to ensure that they do not play with the appliance
(EN 60335-1: 02).
Check that the system has suffered no damage during transport or storage. In particular, ensure
1.3
that the external casing is perfectly entire and in excellent condition; check the efficiency of all
the tank components; replace any parts that are not perfectly efficient.
2. RESPONSIBILITY
The Manufacturer does not vouch for correct operation of the system if it is tampered with or modified, or made
to operate above the values indicated on the data plate.
The Manufacturer declines all responsibility for possible errors in this booklet, if due to misprints or errors in
copying. The company reserves the right to make any modifications to products that it may consider necessary or
useful, without affecting the essential characteristics.
3. DIMENSIONS AND WEIGHTS
The adhesive label on the package indicates the total weight of the system.
The dimensions below are given in millimetres.
FEKABOX 110
ENGLISH
21
page
21
21
21
22
22
24
24
24