Shower/Commode Cushion; Toilet Seat Cushion - Permobil ROHO THE ADAPTOR PAD Manual Del Operador

THE ADAPTOR PAD and ROHO DRY FLOATATION Special Application Cushioning Devices Operation Manual
Shower/Commode Cushion and Toilet Seat Cushion
Intended Use: The ROHO
Commode Cushion) is an adjustable, air-filled, cellular-design,
support surface that utilizes DRY FLOATATION
and is intended for short-term cushioning needs on bedside
commodes and shower chairs to provide skin/soft tissue
protection. There is no weight limit.
Intended Use: The ROHO
Cushion) is an adjustable, air-filled, cellular-design, neoprene
surface intended for short-term cushioning needs on toilets and
portable bedside commodes. There is no weight limit.
Instructions for Shower/Commode Cushion and Toilet Seat Cushion:
1. Slide the hand pump nozzle over the inflation valve. Open
the inflation valve, at least one full rotation. Inflate the
cushion, and then close the inflation valve until it comes
to a stop. Remove the hand pump. Make sure the inflation
valve is closed. Repeat for all inflation valves.
2. Place the cushion on the surface, making sure the air cells
face the individual. Confirm that the individual is in their
usual position. Confirm correct placement of the cushioning
device.
3. Adjust the inflation level as required. When adjustment is
complete, close the inflation valve.
Note: The inflation valve will spin freely when open.
Toilet Seat Cushion Attachment: Use the straps and snaps to secure the cushion to the
surface.
Contact between the skin and areas where the toilet seat is NOT covered by the Toilet Seat
Cushion could result in tissue damage.
CHECK INFLATION! After adjustment, confirm that there is NO CONTACT between the
individual and the base of the cushion. If there is contact, add air.
Shower/Commode Cushion (Shower/
®
technology
®
Toilet Seat Cushion (Toilet Seat
®

Shower/Commode Cushion

Toilet Seat Cushion

6
Open Close