Cushion Adjustment - Permobil ROHO DRY FLOATATION Serie Operación Manual

ROHO DRY FLOATATION Wheelchair Cushions Operation Manual

Cushion Adjustment

Important Safety Information:
- Check inflation frequently, at least once a day!
- DO NOT use an under-inflated cushion or an over-inflated cushion because the product
benefits will be reduced or eliminated, resulting in an increased risk to skin and other soft
tissue. If the cushion does not appear to be holding air, or if you are not able to inflate or
deflate the cushion, see TROUBLESHOOTING. Immediately contact your clinical caregiver,
distributor, or Customer Support
- When possible, use hook and
surface. Hook fasteners are available upon request.
1. Inflate the cushion:
a. Place the cushion in the wheelchair
with the air cells facing up and
the non-skid surface of the cover
facing down. Consult your prescriber
about alternate positions of inflation
valves and ISOFLO Memory Control
(for SELECT Cushions).
b. For SELECT Cushions:
Before inflating, you must open the
ISOFLO Memory Control so that all
of the air cells will inflate. Push
the ISOFLO green knob toward the
unlocked position.
c. Slide the hand pump nozzle over the inflation valve. Open
the inflation valve, at least one full rotation.
Note: The inflation valve will spin freely when open.
d. Inflate until all of the air cells feel firm. Close the inflation
valve until it comes to a stop. Remove the hand pump.
Make sure the inflation valve is closed.
e. Repeat cushion inflation for all valves.
if the problem persists.
loop fasteners to further secure the cushion to the seating
5
Cushion
Cover
Unlocked
Open
Inflation
Valve
Close