Troubleshooting; Safety Notices; Causes And Rectification Of Faults - CASO DESIGN BMG 30 Manual De Instrucciones

Ocultar thumbs Ver también para BMG 30:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 116
Exterior housing
Clean the exterior surfaces of the device with a damp cloth.
Glass turntable, grill rack and rolling ring
The glass turntable, grill rack and rolling ring must be removed and cleaned
occasionally. Wash the glass turntable, grill rack in a warm soapy solution or in the
dishwasher.
The rolling ring should be cleaned regularly to prevent excessive noise development or
a rotational malfunctions. The rolling ring can be washed in a mild soapy solution or in
the dishwasher. Please remember to put the rolling ring back again properly after
cleaning it.
Wipe the bottom of the oven with a mild cleaning agent. If the floor of the oven is
excessively dirty, you can use a mild cleaning agent.

15 Troubleshooting

This chapter provides you with important notices with regard to operating the device.
Observe the following notices to avoid dangers and damages:

15.1 Safety notices

Attention
► Only qualified electricians, who have been trained by the manufacturer, may carry out
any repairs on electrical equipment.
► Improperly performed repairs can cause considerable dangers for the user and
damages to the device.

15.2 Causes and rectification of faults

The following table assists in localizing and rectifying minor faults.
Error
The selected program will
not start.
The turntable turns jerkily.
caso BMG 30
Possible cause
Device door is not closed
Power plug is not plugged in
Fuse is not activated
Dirt between the turntable and
the base of cooking camber
Dirt on rolling ring
Cooking vessel too large
Action
Close device door
Plug in mains plug!
Activate fuse
Remove dirt
Use different cooking vessel
59

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

3332

Tabla de contenido