Powering On/Off - Soundcore Liberty Air 2 Manual Del Usuario

Charging
• Open or close the charging case to activate the LED battery indicator.
• Fully charge both the earbuds and the charging case before the first use.
• To prevent damage, use the provided USB-C cable.
• You can charge the charging case by using a certified wireless charger (not provided).
• Fully dry off the earbuds and the USB port before charging.

Powering On/Off

Open the charging case, the earbuds will automatically power on.
Place the earbuds back into the charging case and close the case, the earbuds will automatically
power off.
ON
• To manually power on, tap and hold the touchpad on either earbud for 2 seconds until the
LED indicator flashes white once.
01 EN
1
or
OFF
1
2
< 30%
30% - 70%
> 70%
100%
2