Hamilton Beach 14340 Manual Del Usario página 4

840164201 ENv03.qxd 10/11/07
To Dry Iron
1. Plug in iron.
2. Turn Adjustable Steam to the Dry Iron position.
3. Set Temperature Settings to desired temperature. With iron
in an upright position, allow 3 minutes for iron to reach
desired temperature. Do not preheat iron with soleplate
facing down.
4. To turn iron off, set Temperature Settings to OFF ( O ).
The iron may be turned off by pressing the Temperature
Setting Button for 3 seconds.
To Steam Iron
1. Unplug iron. Open Water Tank Fill Cover. Using a cup,
slowly pour 6 ounces ( 3
tank opening. Close Water Tank Fill Cover.
2. Plug in iron.
3. Set Temperature Settings to desired setting in steam
range. With iron in an upright position, allow 3 minutes for
iron to reach desired temperature. Do not preheat iron with
soleplate facing down.
4. Set Adjustable Steam to desired steam output.
5. To turn off, turn Adjustable Steam to Dry Iron. Set
Temperature Settings to OFF ( O ). (Iron may also be turned
off by pressing Temperature Setting Button for 3 seconds.)
6. Empty water from the iron following directions in "Care and
Cleaning."
Water
Please use ordinary tap water. If you have extremely hard
water, alternate between tap water and distilled water for
use in the iron.
11:15 AM Page 6
⁄ cup) of tap water into the water
4
6
Features
(on selected models)
Adjustable Steam
Provides minimum steam for wool or
maximum steam for linen. Set the dial
to to change to Dry Iron.
Steam and Spray Buttons
Push Steam Button for an extra blast of
steam. Push Spray Button to release a
fine spray of water for difficult wrinkles
in cotton or linen.
Retractable Cord
1. Pull cord to desired length. Do not
unwind cord beyond colored tape
indicator on cord.
2. To store cord, press and hold the
Cord Release Button while guiding
the cord into the storage area.
WARNING! To reduce the risk of
an eye injury, hold the plug while
retracting the cord.
Steam Spray
7