Temperature Settings - Hamilton Beach 14340 Manual Del Usario

840164201 ENv03.qxd 10/11/07
Features
(continued)
Vertical Steam
1. Follow Steps 1 through 4 in
"To Steam Iron."
2. Hang garment in a location that is
not susceptible to damage from heat
or moisture. Do not hang in front of
wallpaper, window, or mirror.
3. Hold iron about 6 inches away from garment. Press and
release the Steam Button to steam out wrinkles. Do not
press Steam Button more than once every 3 seconds.
4. To turn iron off, turn Temperature Settings to OFF ( O ).
Unplug iron.
5. Empty water from the iron following directions in "Care and
Cleaning."
NOTICE: Do not allow the hot soleplate to touch delicate
garments.
11:15 AM Page 8
8

Temperature Settings

Steam To Iron
Setting
Off
Nylon
Dry iron on the reverse side of the fabric.
Acrylic
Dry iron on the reverse side of the fabric.
Silk
Dry iron on the reverse side of the fabric.
Polyester Iron with fabric still damp.
Rayon
Iron on the reverse side of fabric.
Wool
Steam iron on the reverse side of fabric.
Cotton
Iron while still damp using steam
and/or spray.
Linen
Iron on reverse side of fabric while still
damp.
Care and Cleaning
Iron
1. The Water Tank of your iron should be emptied after each
use. Turn Temperature Settings to OFF ( O ). Unplug the
iron and open Water Tank Fill Cover. Turn iron upside down
until Water Tank Opening is parallel with sink. Water will
run out of water tank opening.
2. After iron has completely cooled, store in an upright posi-
tion. NOTICE: Do not store iron laying flat on soleplate.
Ironing Instructions
9