Changing the input and output trays for incoming faxes
Changing the volume setting
22 Chapter 2 Faxing
You can select which printer input tray to use for printing incoming faxes.
If your mfp has multiple output trays, you can also select a printer output
tray for the printed faxes.
To change the input and output trays
1
On the control panel, press the menu button to access the main
menu.
2
Select CONFIGURE DEVICE.
3
Select the FAX menu.
4
Select FAX RECEIVE.
5
To set up the input tray, select FAX INPUT TRAY and select the
appropriate printer tray.
6
If the mfp has multiple output trays, select FAX OUTPUT TRAY and
select the appropriate printer tray.
7
From the INFORMATION MENU, print a configuration page to
determine the input and output tray numbering.
You can adjust the volume for the fax accessory modem.
To change the volume setting
1
On the control panel, press the menu button to access the main
menu.
2
Select CONFIGURE DEVICE.
3
Select the FAX menu.
4
Select GENERAL.
5
Select MODEM VOLUME.
6
Select the desired volume setting.
ENWW