Troubleshooting; Is Your Fax Set Up Correctly - HP mfp analog fax Guía Del Fax

3
Note

Is your fax set up correctly?

ENWW

Troubleshooting

Use the information in this chapter to troubleshoot general fax issues.
Before you can use your fax accessory, you must complete the following
tasks:
set the country/region setting
set the time and date
set your fax header
set rings-to-answer
When the fax accessory is installed for the first time, the settings must
be entered manually by the administrator by going into the menus.
In the U.S. and many other countries/regions, setting the time, date, and
other fax header information is a legal requirement.
Use the following checklist to help identify the cause of any faxing
problems you are encountering:
Are you using the phone cord supplied with the fax accessory?
This fax accessory has been tested with the supplied phone cord to
meet RJ11 specifications.
Is the Fax/Phone line connector seated into the socket on the
fax accessory?
Make sure that the phone jack is well seated into the socket and
that the PCMCIA modem card is firmly seated in the fax accessory.
Is the phone wall jack working properly?
Verify that a dial tone exists by attaching a phone to the wall jack.
Can you hear a dial tone, and can you make a phone call?
Is your fax set up correctly? 29