Setting tone or pulse dialing
Setting redial rules
Note
24 Chapter 2 Faxing
You can set the fax accessory to use either tone or pulse dialing.
To set tone or pulse dialing
1
On the control panel, press the menu button to access the main
menu.
2
Select CONFIGURE DEVICE.
3
Select the FAX menu.
4
Select FAX SEND.
5
Select DIALING MODE.
6
Select either tone or pulse.
You can select how many times the fax accessory should retry if it gets a
busy signal or no answer. You can also specify the retry interval.
To set redial rules
1
On the control panel, press the menu button to access the main
menu.
2
Select CONFIGURE DEVICE.
3
Select the FAX menu.
4
Select FAX SEND.
5
To set the retry information, select from the following options:
•
Select RETRY COUNT BUSY
•
Select RETRY COUNT NO ANSWER
•
Select RETRY INTERVAL
Each option can be set independently and in any order.
6
Type in the desired setting.
ENWW