Publicidad
Idiomas disponibles
Idiomas disponibles
en
8
Vibration
Classification of FEIN
application tools accord-
ing to vibration class
VC0
VC1
VC2
VC3
VC4
VC5
a
K
* These values are based on a work cycle consist-
ing of no-load and full-load operation of the same
duration.
For information on the vibration class assigned to
the application tool, please refer to the enclosed
data sheet 3 41 30 443 06 0.
Intended use of the power tool:
Hand-guided oscillator for sanding small sur-
faces, corners and edges, for sawing thin parts
of steel sheet, wood and plastic, for scraping,
polishing, rasping, cutting and separating with-
out water in weather-protected environ-
ments, using the application tools and
accessories recommended by FEIN.
Weighted
When using the large round sanding plate
acceleration*
(No. 63806195210, Ø115 mm) or the cleaning
kit for tile joints (No. 63719011220), the
2
< 2.5 m/s
damping system can be subject to overload
2
< 8 ft/s
due to the heavy weight of the accessories.
2
< 5 m/s
This becomes apparent through unpleasant
2
< 16 ft/s
and very intense vibration of the machine.
Corrective action: Reduce the speed of the
2
< 7 m/s
machine to electronic level 2.
2
< 23 ft/s
Due to the then possibly reduced working
2
< 10 m/s
progress, the machine is only suitable to a
2
< 33 ft/s
limited extent for above mentioned accesso-
2
ries.
< 15 m/s
2
< 50 ft/s
2
> 15 m/s
2
> 50 ft/s
2
1.5 m/s
2
4.91 ft/s
Possible overloading of the vibration
damping with especially heavy accesso-
ries!
Publicidad
