Setting Up And Electrical Connection - Medion MD 11711 Manual Del Usuario

Setting up and electrical connection

•
Connect the microwave only with an appropriate 230 V~50 Hz safety
plug which has at least a 16 Amp fuse. Do not use an extension cable.
•
Ensure that the power cable is undamaged and does not run
underneath the appliance or over any hot surfaces.
•
The microwave should be set up on a level, stable surface, which is
able to carry the weight of the appliance as well as the food which is to
be prepared within it. Only set up the microwave in a safe, dry
environment.
•
The appliance is freestanding. It is not designed to be integrated in
kitchen units.
WARNING!
Please pay attention to the minimum safe distances and under no
circumstances cover the ventilation slots.
Protect the appliance from water droplets or spray. If the appliance does
become wet then pull out the plug immediately.
WARNING!
During use the touchable surfaces may become very hot!.
4
Do not place any objects on the microwave as
these may become hot during use. To ensure
adequate ventilation a minimum safe
clearance distance of 20 cm, 10 cm at the
back side, and 5 cm on both sides must be
observed. The openings in the appliance
should not be covered or blocked.