Publicidad
Idiomas disponibles
Idiomas disponibles
6.0 maintenance. seRvicing and stoRage
6.4
Rollgliss™ Explorer™ ascenders are personal protective equipment (PPE) and need to be maintained to ensure a safe
working life.
recommended ascender user maintenance procedures:
A) Wash ascenders in clean water only. Attention should be given to the cam and latch to ensure any grit is removed and
they are moving smoothly. To remove grit or stubborn dirt and grime that can cause stiffness in the operation of the
cam, use a light cleaning agent such as WD40 or equivalent. When a cleaning agent is used ensure that all remnants
are washed off.
B) After washing, dry the ascender with a soft cloth and lightly oil the cam spring and latch spring. Remove excess
lubricant.
C) Inspect the cam for worn teeth which could interfere with the proper function of the ascender. If cam teeth are no
longer pointed or are flat, the ascender may slip under load. Discard the ascender if it fails this maintenance step.
D) If the ascender body or carabiner holes appear to be stressed, discard the unit.
E) Store in a clean and dry location.
note:
Service and/or repairs to the device shall only be carried out by the manufacturer and/or their representative
as authorized in writing.
8.0 labels and maRkings.
The following labels and markings must be fully legible:
rollgliss™ explorer™ Hand ascender
The Rollgliss
Explorer™ Ascenders cheeks are marked with the following information:
®
Manufacturer's Name/Mark
Part number
Model
Date of manufacture
Serial number
Rope sizes
Number and year of standard
Certifying agency
Minimum breaking strength in kg
Rollgliss
8700567
CAPITAL SAFETY
TM
www.capitalsafety.com
MAX AT CAM 550kg
UP
10.5mm (
Ø
SAI GLOBAL
TM
Australian
Standard
MEETS NFPA1983 (2012 ED) T Lic. SMKH25515
AS/NZS 4488 1-97 Lic. SMKH25365
EN 567:2013 Lic. CEPPE20052
chest ascender
SAI GLOBAL
Australian
MEETS NFPA1983 (2012 ED) T Lic. SMKH25515
AS/NZS 4488.1-97 Lic. SMKH25365
EN 567:2013, EN 12841 Lic. CEPPE20052
Hand ascender
5
TM
) - 13mm (½")
27
"
64
SAI GLOBAL
D.O.M.
Serial #
TM
MM YY
XXXXXX-XXX
WARNING
Quality
PROPER TRAINING
ISO 9001
IS ESSENTIAL.
CAPITAL SAFETY
TM
WWW.CAPITALSAFETY.COM
UP
Rollgliss
TM
8700118
A1 EXP L Ascender
MAX AT CAM 600kg
10.5mm (27/64") - 13mm (1/2")
SAI GLOBAL
TM
TM
MM YY
xxxxxx
Quality
Standard
ISO 9001
Publicidad
