Replacing Belt - Panasonic Quickdraw MC-UG502 Instrucciones De Operación

+
Lift Agitator Up
Soulever l'agitateur
Inidad del agitador
+
Motor Shaft
Arbre
d'entraînement
du moteur
Eje del motor
+
Groove
Ouverture
Ranura

Replacing Belt

Install New Belt
Poser la nouvelle
courroie
Instalaciòn de la
correa
End Cap
Bouchon
Tapa del extremo
- 32 -
➢ ➢ Remove lower plate.
➢ ➢ Remove agitator by carefully lifting
out.
➢ ➢ Remove worn or broken belt.
➢ ➢ Loop new belt (Panasonic Type UB8
only) around motor shaft and belt
pulley; see illustration for correct
belt routing.
➢ ➢ Reinstall agitator back into nozzle
housing grooves.
➢ ➢ After reinstalling the agitator, turn it
by hand to make sure that belt is not
twisted or pinched and that all
rotating parts turn freely.
➢ ➢ Reinstall lower plate.