Removing Clogs - Panasonic Quickdraw MC-UG502 Instrucciones De Operación

Hose
Tuyau
Manguera
Cover (Suction Inlet)
Couvercle
(Entrée d'aspiration)
Cubierta
(Abertura de aspiración)
Short Hose
Tuyau court
Manguera corta
Short Hose
+
Tuyau court
Manguera corta
Hose Fitting
Raccord du tuyau
Conexión para manguera

Removing Clogs

The hose located on the back of the
vacuum cleaner carries the dirt from the
nozzle up to the dust bag. If the hose
should become clogged:
➢ ➢ Unplug vacuum cleaner.
➢ ➢ Pull open suction inlet cover and
check for clogging.
➢ ➢ Disconnect wand from short hose
and check wand and hose.
➢ ➢ Plug in vacuum cleaner and turn on.
➢ ➢ Disconnect wand and stretch hose in
and out to remove clog.
➢ ➢ If clog still exists, turn vacuum
cleaner OFF and UNPLUG POWER
CORD.
➢ ➢ Remove lower plate.
➢ ➢ Remove short hose from nozzle by
lifting straight up.
➢ ➢ Inspect hose end and clear any
obstructions.
➢ ➢ Reinstall short hose and lower plate.
- 36 -