Rohm CAPTIS-M Traducción De Las Instrucciones De Servicio Originales página 55

Plato porta pinza
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

The following damage or defects are excluded from the warranty
caused by the operator due to non-compliance with the written
instructions of the seller with regard to
commissioning (e. g. incorrect construction and assembly work),
operation and
maintenance of the equipment (insofar as this maintenance has not
been contractually taken over by the manufacturer);
caused by technical operating conditions unknown to the manufacturer
(e. g. chemical or electrolytic influences) and/or machine specifications;
caused by natural wear;
caused by force majeure;
caused by incorrect operation of all types or by incorrect use or
operation of the collet chuck CAPTIS-M. This also includes loading
beyond the specified load limits (e. g. speed, pressure, force etc.).
This also includes damage caused if the customer or third parties carry
out modifications or repairs to the services / products of the manufacturer
without prior permission of the manufacturer.
Excepted from this are damage or defects which have occurred which
were demonstrably not due to these modifications or repairs.
which occur due to use of the collet chuck CAPTIS-M under altered
operating conditions (e. g. materials, tools, cutting parameters,
programs etc.), in particular without consulting and obtaining written
authorisation from the seller or manufacturer;
which are due to altered environmental conditions.
122017 / 1.0
About these Operating Instructions
53

Publicidad

Tabla de contenido
loading

Tabla de contenido