Clamping - Rohm CAPTIS-M Traducción De Las Instrucciones De Servicio Originales

7.3 Clamping

122017 / 1.0
Warning
Overloading of components.
Breakage and slewing of parts.
 Observe maximum speed.
 Observe operating data in accordance with the drawing.
 Wear personal protective equipment.
Notice
Chuck key not removed.
Ejection of the chuck key.
 Use safety key.
 Always remove the chuck key directly after clamping /
unclamping.
1
2
Clamping
1. Insert the safety key
(WAF 11) (1).
2. Turn clockwise to clamp.
 The collet chuck (2) moves
back and clamps the
workpiece.
3. Remove the safety key (1).
Operation
84