Rohm CAPTIS-M Traducción De Las Instrucciones De Servicio Originales página 76

2. Place the collet chuck CAPTIS-M with the external fit on the base plate
and firmly tighten with the fixing screws. For tightening torque, see
Chapter 3.2 Technical Specifications, page 62.
3. Put machine into set-up mode.
4. Clean the machine table.
5. Place the collet chuck CAPTIS-M with the base plate in the correct
position on the machine table (align if necessary) and firmly tighten with
the fixing screws.
 Base plate mounted
122017 / 1.0
Assembly
74