Rohm CAPTIS-M Traducción De Las Instrucciones De Servicio Originales página 71

Flange pursuant to DIN-ISO702-1
Flange pursuant to DIN-ISO702-4
4. Screw the flange to the machine spindle with the fixing screws. For
tightening torque, see Chapter 3.2 Technical Specifications, page 62.
5. Place the collet chuck CAPTIS-M on the flange in the correct position
and tighten slightly with the fixing screws.
6. Check radial and axial run-out on the check collar of the chuck and align
if necessary.
7. Firmly tighten the fixing screws. For tightening torque, see Chapter 3.2
Technical Specifications, page 62.
Flange mounted.

122017 / 1.0
Assembly
69