Preliminary Recommendations - WEG PLC300 H3 Guia De Instalacion

Safety Instructions

1.3 PRELIMINARY RECOMMENDATIONS

DANGER!
Only qualified personnel, familiar with PLC300 and related equipment
must plan or perform the installation, commissioning, operation and
maintenance of this equipment.
The personnel must follow the safety instructions described in this
guide and/or defined by local standards.
The noncompliance with the safety instructions may result in death
risk and/or equipment damage.
NOTE!
For the purposes of this guide, qualified personnel are those trained
in order to be able to:
1. Install, ground, power up and operate the PLC300 in accordance
with this guide and the safety legal procedures in force.
2. Use the protective equipment in accordance with the standards.
3. Give first aid.
DANGER!
Always disconnect the general power supply before touching any
electrical device associated to the PLC.
ATTENTION!
The electronic cards have component parts sensitive to electrostatic
discharge. Do not touch directly the component parts or connectors.
NOTE!
Fully read this guide before installing or operating this equipment.
PLC300 | 5