Safety Instructions; Safety Warnings In This Guide; Safety Warnings In The Product - WEG PLC300 H3 Guia De Instalacion

Safety Instructions

1 SAFETY INSTRUCTIONS
This quick installation guide contains the basic information necessary to commission
the PLC300. It has been written to be used by qualified personnel with suitable
training or technical qualification for operating this type of equipment. The personnel
shall follow all the safety instructions described in this manual defined by the local
regulations. Failure to comply with the safety instructions may result in death, serious
injury, and/or equipment damage.
For further information, refer to the user's manual available for download on the
website: www.weg.net.

1.1 SAFETY WARNINGS IN THIS GUIDE

In this guide, the following safety warnings are used:
DANGER!
The procedures recommended in this warning have the purpose of
protecting the user against death, serious injuries and considerable
material damages.
ATTENTION!
The procedures recommended in this warning have the purpose of
avoiding material damages.
NOTE!
The information mentioned in this warning is important for the proper
understanding and good operation of the product.

1.2 SAFETY WARNINGS IN THE PRODUCT

The following symbols are attached to the product, serving as safety notices:
High voltages are present.
Components sensitive to electrostatic discharge.
Do not touch them.
Mandatory connection to the protective earth (PE).
4 | PLC300