• Decide where you want the racking to be installed.
• Place the pedestal module(s) on a flat surface.
•Attach the basic module(s) to the wall (from the 2nd one up).
• Do not tighten the screws completely until assembly is
complete.
Pivoting Bottle Holder
(MV211)
Shelves (x2)
(MV7)
Vertical Bottle
Holder
(MV4)
Sliding Shelves
(MV22-221/MV12-121
MV14-141/MV15-151
MV20-201)
Cross Module
(MV18)
Feet (x2)
(MV9)
c
ontent
Feet
(MV9)
Pedestal Module
(MV2 / MV2L40)
Basic Module
(MV1/ MV1L40)
Corner Pedestal Module
Basic Corner Module
Bar Module
(MV6)
Rack Module
(MV8)
Cross Module
(MV18)
Shelves
(MV10-101/MV22-221/MV12-121/
MV14-141/MV15-151/MV20-201/MVMS10-1/
MVMS15-151/MVMS10L40/MVMS1L40/MV10L40/
MV101L40)
!!! iMPoRtANt !!!
Upper Finish (x2)
(MV3)
Horizontal Bottle
Holder
(MV5)
p.04
p.04
p.05
p.06
(MV17)
p.07
(MV16)
p.08
p.09
p.10
p.11
• Do not pull out several shelves at the same time.
• Do not lean on the shelves.
• Do not sit on the bar module shelf.
• Do not climb on the side modules.
Rack Module
(MV8)
Upper Finish
(MV3)
Shelves
(MV7)
Vertical Bottle Holder
Horizontal Bottle Holder
Pivoting Bottle Holder
Finishing Plugs
(MV13)
Basic module
(MV1)
Basic module
40
(MV1L40)
Basic Corner Module
(MV16)
Pads (x10)
(MV13)
Bar Module
(MV6)
Storage Shelf
(MV10-101)
Corner Pedestal Module
(MV17)
Pedestal Module
(MV2)
Pedestal Module
40
(MV2L40)
p.12
p.12
p.13
(MV4)
p.13
(MV5)
p.14
(MV211)
p.15
cm
cm
3
GB