Service, Maintenance, And Storage - Briggs & Stratton 800X Manual Del Operador

Operator Safety
18. Never direct discharge at bystanders or allow anyone in
front of the unit.
19. Never leave a running unit unattended. Always
disengage the auger and traction controls, stop engine,
and remove keys.
20. Do not operate the unit while under the influence of
alcohol or drugs.
21. Keep in mind the operator is responsible for accidents
occurring to other people or property.
22. Data indicates that operators, age 60 years and above,
are involved in a large percentage of power equipment-
related injuries. These operators should evaluate their
ability to operate the unit safely enough to protect
themselves and others from injury.
23. DO NOT wear long scarves or loose clothing that could
become entangled in moving parts.
24. Snow can hide obstacles. Make sure to remove all
obstacles from the area to be cleared.
CHILDREN
Tragic accidents can occur if the operator is not alert to
the presence of children. Children are often attracted
to the unit and the operating activity. Never assume
that children will remain where you last saw them.
1. Keep children out of the area and under the watchful
care of another responsible adult.
2. Be alert and turn unit off if children enter the area.
3. Never allow children to operate the unit.
4. Use extra care when approaching blind corners, shrubs,
trees, or other objects that may obscure vision.
CLEARING A CLOGGED DISCHARGE CHUTE
Hand contact with the rotating impeller inside the discharge
chute is the most common cause of injury associated
with snowthrowers. Never use your hand to clean out the
discharge chute.
To clear the chute:
1. SHUT OFF THE ENGINE.
2. Wait 10 seconds to be sure the impeller blades have
stopped rotating.
3. Always use a clean out tool, not your hands.

SERVICE, MAINTENANCE, AND STORAGE

1. Check shear bolts and other bolts at frequent intervals
for proper tightness to be sure the equipment is in safe
working condition.
2. Never store the machine with fuel in the fuel tank inside
a building where ignition sources are present such as hot
water and spacer heaters, or clothes dryers. Allow the
engine to cool before storing in any enclosure.
3. Always refer to the operator's manual for important
details if the snowthrower is to be stored for an extended
period.
4. Maintain or replace safety and instruction labels as
necessary.
5. Run the machine a few minutes after throwing snow to
prevent freeze-up of the collector/impeller.
4
6. If fuel is spilled, do not attempt to start the engine but
move the machine away from the area of spillage and
avoid creating any source of ignition until fuel vapors
have dissipated.
7. Always observe safe refueling and fuel handling
practices when refueling the unit after transportation or
storage
8. Always follow the engine manual instructions for storage
preparations before storing the unit for both short and
long term periods.
9. Always follow the engine manual instructions for proper
start-up procedures when returning the unit to service.
10. Maintain or replace safety and instruction labels as
necessary.
11. Keep nuts and bolts tight and keep equipment in good
condition.
12. Never tamper with safety devices. Check their proper
operation regularly and make necessary repairs if they
are not functioning properly.
13. Components are subject to wear, damage, and
deterioration. Frequently check components and
replace with manufacturer's recommended parts, when
necessary.
14. Check control operation frequently. Adjust and service as
required.
15. Use only factory authorized replacement parts when
making repairs.
16. Always comply with factory specifications on all settings
and adjustments.
17. Only authorized service locations should be utilized for
major service and repair requirements.
18. Never attempt to make major repairs on this unit unless
you have been properly trained. Improper service
procedures can result in hazardous operation, equipment
damage and voiding of manufacturer's warranty.
19. Check shear bolts and other bolts at frequent intervals
for proper tightness to be sure the equipment is in safe
working condition.
EMISSIONS
1. Engine exhaust from this product contains chemicals
known, in certain quantities, to cause cancer, birth
defects, or other reproductive harm.
2. If available, look for the relevant Emissions Durability
Period and Air Index information on the engine emissions
label.
ferrismowers.com | snapperpro.com