Xylem SI Analytics TitroLine 7800 Manual De Instrucciones página 186

186
After the sample or the standard is added, you must press <START> again.
Depending on the method settings, you will be prompted for the sample identification (Fig. 72) and the weighed-in
quantity (Fig. 73). You can use an external PC keyboard for entering a 20-digit alphanumeric sample ID.
Fig. 72
Fig. 73
The balance data can be entered using the front keyboard or an external keyboard.
The input is to be confirmed with <ENTER>/<OK>.
In the case of an automatic acceptance of the balance data, the weighed-in quantities will be read in from a
memory. If the memory does not contain any balance data, a message will appear (Fig. 74).
Fig. 74