Using The Easy Interactive Function; Attaching A Security Cable - Epson BrightLink 475wi+ Guia De Instalacion

8 Appendix

Using the Easy Interactive Function

After you install a BrightLink model, you need to perform calibration to align the positions of the cursor and
interactive pens.
In order to use the Easy Interactive Tools software, you must first install the software on the computer.
Mac OS X users also need to install a driver that enables the pens to work. Both software programs are
included with the BrightLink projector.
For details, see User's Guide on the BrightLink 475wi+/485wi+ CD.

Attaching a Security Cable

If the projector is to be installed in a room where it will be left unattended, you can use a commercially
available theft-prevention wire lock to secure the projector to a post or other object to prevent someone from
taking it.
Pass the wire for the theft-prevention wire lock through the security cable installation point.
For details on how to lock the wire lock, refer to the User's Guide supplied with the wire lock.
After installation of the projector is complete, make sure you leave the remote control,
batteries, and CDs in the room with the projector. Also leave the pens, batteries, pen tray, and
all documentation in the room with the projector.
38