Maintenance Works; Disposal; Removing The Battery - Kärcher BR 35/12 C Bp Manual Del Usuario

Monthly
Check the condition of the seals be-

tween waste water tank and cover,
replace if required.
Yearly
Have the prescribed inspection car-

ried out by the customer service.

Maintenance Works

Replacing the suction lips
Compress the fastening devices

and pull the vacuum lips out of the
vacuum bar towards the bottom.
Remove the vacuum lips from the

holder.
Note:
Thanks to the perforation pattern the
vacuum lips cannot be mixed up. They
cannot be turned and reinstalled.
Replace vacuum lips.

Insert the holder with the vacuum

lips into the vacuum bar and snap
into place.
Replacing the brush roller
WARNING
Risk of crushing due to the parking
stand folding up during the brush re-
placement. Turn the steering wheel by
90° to the left prior to the brush re-
placement.
Press the release button for the

brush roller and swivel the brush
roller toward the bottom and pull it
off the driver.
Place the new brush roller on the

driver and lock into place on the op-
posite side.
Maintenance contract
To ensure a reliable operation of the
appliance maintenance contracts can
be concluded with the competent
Kärcher sales office.

Removing the battery

DANGER
The removal of the battery may only be
performed by the Kärcher aftersales
service or a specialist.
The evaluation, whether the battery is
damaged or not, is done by an autho-
rised aftersales technician
The Chapter "Safety instructions" for
handling accumulators must be ob-
served unconditionally.
1 Screw
2 Cover
Unscrew 2 screws.

Swivel the lid downwards.

Loosen and remove the battery

plug.
Remove the battery.

Dispose of used battery in accor-

dance with the applicable provi-
sions.
– 11
EN

Disposal

13