Mettler Toledo Ariva Serie Guía Rápida página 12

Group.Step Function
Group 1
1.10 (reserved)
Group 2
2.3 Expanded Weight Mode
Group 3
3.1 Communication Type
3.2 Baud rate
3.3 Parity
3.4 Data bits
3.5 Stop bits
3.6 Protocol Selection
3.7 (reserved)
3.8 (reserved)
12 Ariva Quick Guide | 30353726
Possible Selections
Press Zero to enter Group 1
Press Tare to go to Group 2
Press Zero to enter Group 2
Press Tare to go to Group 3
OFF – Weight is displayed in normal display increments.
ON – Weight is displayed in high resolution (ten times normal resolution).
Note:
1. No weighing transactions can occur in Expanded Weight Mode.
2. POS protocols are not operational in this mode.
3. Press >T< key to exit Expanded Weight Mode.
Press Zero to enter Group 3
Press Tare to go to Group 4
0 – RS-232
1 – USB Ser/CDC (Virtual COM Port)
2 – USB Ser/HID
3 – USB HID POS
4 – USB IBM OEM HID
0 – 1200
1 – 2400
2 – 4800
3 – 9600
4 – 19,200
5 – 38,400
6 – 57,600
7 – 115,200
0 – None
1 – Even
2 – Odd
0 – 7 data bit
1 – 8 data bit
0 – None
1 – 1 stop bit
2 – 2 stop bit
0 = (reserved)
1 = (reserved)
2 = NCI Weightronix (WO/PC)
3 = 8217 Mettler-Toledo (WO)
4 = 8213 Mettler-Toledo (WO)
5 = EPOS 1 (WO)
6 = EPOS 2 (WO)
7 = SL4700/TEC MA
8 = Dialog 06 (PC)
9 = Dialog 04/02 (PC)
10 = Extended Dialog 06 (PC)
11 = ICL (WO)
12 = Shekel (WO)
13 = RIVA 5462/Nixdorf 2 (WO)
14 = IP3 (PC)
15 = (reserved)
16 = Colruyt
17 = MT L2
18 = Berkel (WO)
19 = Berkel (PC)
20 = Anker
21 = CAS (WO)
22 = Epelsa