3.6
Errors
16 Ariva Quick Guide | 30353726
The following table lists error messages, descriptions, and corrective actions.
System error
Data error
EEPROM error
General error
Calibration error
Communication error
Over capacity
(weight > max. cap.)
in weight display
Overflow
in total price display
Under zero
(weight < 0)
in weight display
The "
" after each error code are two numbers used to uniquely identify an error. Please record
this number and report this specific error to METTLER TOLEDO along with the general error.
Cycle power to the scale. For continued
problems call METTLER TOLEDO for
replacement.
Cycle power to the scale and restart
calibration.
Check scale communications parameters (via
the menu) to insure they are the same as the
POS system.
Remove weight from Platter, if that does not
work try cycling the power to the scale. For
continued problems call METTLER TOLEDO for
replacement.
Total price too large to display.
Place the platter on the scale. Either press the
Zero button or cycle power to the scale. For
continued problems call METTLER TOLEDO for
replacement.